Valtorc -- Sanitary Valves

Valtorc -- Valves, Actuators, Automation Products, Controls & Systems Integration

VALTORC
1-866-VALTORC
770-423-7100
Fax 770-499-7483
PO Box 1928
3105 Carter Circle
Kennesaw GA 30144
email: controls9@aol.com

Plug Valves

Sanitary Plug Valves
	Plug valves have been used in a wide variety of low pressure sanitary and industrial applications. Two factors make them popular: versatility and a full unrestricted flow that allows no product restrictions through the valve. Valtorc offers plug valves in both two-way and three-way models in T304 and T316 materials. Clamp, weld and bevel seat connections are standard. Stainless plugs are available in I" through 3" sizes. Rubber plugs are available in 1", 11/2" and 2" sizes. Valtorc plug valves meet all 3A requirements.

Sanitary Butterfly Valves
	Our unique, patented clamp design permits quick disassembly without tools. Manual, air actuated, and air actuated with two indicating switches (Solenoid Valve 110V or 24V) are standard. Clamp or butt weld ends are standard. Other connections are available upon request. Available seat materials include Silicone, Viton, EPDM, and Buna-N. Sizes range from I" through 4". All product contact surfaces are T316 material.

Standard Sanitary Ball Valves
	Balanced 4-seat or 5-seat construction True Union mounted ball Live loaded stem packing Bottom-entry stem Full port design Mulit-position lever handle Locking pin Maximum pressure: 1000 PSI (1/2" to 2") and 600 PSI (3" to 4") Flow options: 3 way side entry T pattern; 3 way side entry L pattern; 3 way bottom entry LL 90° or L 180°; 3 way bottom entry L pattern; 4 way bottom entry L pattern; 4 way side entry LL pattern, 4 way bottom entry LL pattern, or 5 way L or T pattern

3-PC, 316 Stainless Steel Sanitary Ball Valves
	ISO 9002 Clamp end cavity filled virgin Teflon® seat Investment casting True I.D. bore Blow-out proof stem 1000 psi WOG Mounting pad Mounting pad refers to ISO 5211 & DIN 3337 Latch lock handle Internal finish 15RA

Sanitary Butt Weld Fittings

Sanitary butt weld fittings are used on permanent installations where
process piping and equipment can be cleaned in place (CIP) and
removal from the system is not required. Butt weld fittings are offered
in nominal tube sizes I" through 4" in T304 and T316L materials.
Uniform wall thickness for 1", 11/2", 2", 2 1/2" and 3" sizes measures .065 (16 ga).
In 4" size, wall thickness measures .083 (14 ga). Fractional and larger sizes
are available upon request.

Valtorc offers polished 1.D. and O.D. fittings for immediate shipment.
Other polished combinations may be ordered. Our sanitary butt weld
fittings meet all 3A requirements.

Sanitary Check Valves
	Check valves are widely used for both sanitary and industrial applications to prevent back flow of product. Valtorc's ball check valves are designed to allow full product flow during processing. Once the product flow stops the ball rolls back to seat at inlet, preventing back flow. Ball check valves are commonly used with liquid products. Valtorc's spring check valves are designed to assist closure pressure to create a positive shutoff. They are commonly used with liquid products as well. Both valves are offered with clamp and weld ends. Other connections are available upon request. Sizes range from I" through 3" in T316L stainless steel.

Air Actuated Sanitary Valves
	Air actuated process valves are used to automate systems. Valtorc offers process valves in many different configurations with clamp and weld connections as standard. Other connections are available upon request. These valves are offered in two-way (shutoff) or three-way (divert) models. Valve stems have a replaceable Teflon o-ring seat. One actuator fits all sizes and is offered in normally open or normally closed position. Valve sizes range from 11/2" through 3" in T304 material.

1/4" to 4" Sanitary Ball Valves
	Sizes 1/4 to 4 inch Reduced & Full port Stainless steel body and trim 1-line or clamp end Optional cavity fill

Clamp Fittings

Clamp style fittings are most popular for easy assembly and breakdown of
process lines and equipment. Valtorc offers clamp fittings in T304 and T316L
materials in I" through 4" sizes. Fractional, 6" and 8" sizes are available upon request.

Gaskets for clamp fittings are available in several different materials, with Buna-N
and Teflon as standards. Lightweight and heavy-duty clamps complete the unions.
Valtorc's clamp fittings meet all 3A requirements.

Unpolished Tube O.D. Weld Fittings

Unpolished tube 0.D. weld fittings are used in a wide variety of industrial applications
where sanitary finishes are not generally required. Valtorc's tumbled finish presents
a consistent uniform appearance.

Valtorc's unpolished weld fittings are offered in nominal tube sizes I" through 4" in
T304 and T316L materials. Uniform wall thickness for 1", 11/2", 2", 2 1/2", and 3"
sizes measures .065 (16 ga). In 4" size, wall thickness measures .083 (14 ga).
Fractional and larger sizes are available upon request.

Bevel Seat Fittings

Bevel seat fittings are used on process equipment and piping to ensure
rigidity of the system. Bevel seat unions consist of a threaded bevel ferrule
mated with a plain bevel ferrule. Both are offered in T304 and T316L materials.
Hex union nuts made of only T304 material are used to complete the union.
Gaskets for Valtorc's bevel seat unions are not required for positive shutoff;
however, gaskets may be purchased upon request.

Valtorc's bevel seat fittings meet all 3A requirements and are available
in I" through 4" sizes.

VALTORC
1-866-VALTORC I 770-423-7100 I Fax 770-499-7483
PO Box 1928 I 3105 Carter Circle I Kennesaw GA 30144
email: controls9@aol.com

Go To Top Of Page

Home I Download Catalog I Request Quote I Contact Us
Valves I Actuators I Valves & Actuator Packages
Letter From President I e-mail Us I Site Map

© 2007 VALTORC, All Rights Reserved