• Visual Position Indicator
  
• 'Quick-Set-Set" Cam
  
• A L S Limit Switch adjustment cams
  are splined and spring loaded, the
  switch cam position can be quickly
  adjusted without tools.
• Multipoint Terminal Strip
• Terminal strip with 8 contacts is standard
  allowing connection of solenoid valve.
• Dual Wire Potting
  Dual 1/2" conduit entries
  Dual 3/4" conduit entries
• Captive Cover Bolts
• These are designed to be held captive
  by the cover when removed.
• Easy Mountjinq_ Bracket
• Mounts easily to any ISO 5211
  actuator.

NAME - NO - SPECIFICATION

Position indicator outer - 1 - Polycarbonate

Position indicator inner - 1 - Polycarbonate

Housing - 2 - Die-Casting aluminum

Shaft (stem) - 1 - 304 stainless steel

Micro switches - 2 - Used in UL, CSA approved

Inserts - 2 - Bronze

O-Ring - 4 - Nitrile (Rubber)

Cams - 2 - Polycarbonate (open/closed)

Spring - 1 - 304 stainless steel

Cover screws - 4 - 304 stainless steel

Terminal - 8pv - Polyethylene

Applications

Continuous or digital feedback of valve position for process control applications.

• Switch or potentiometer feedback
• Weatherproof or hazardous area designs
• High visibility indicator For manual or actuated valves

Specifications

• Ratings: NEMA 4 or NEMA 7
• Switches: Snap acting or proximity
• Materials: Aluminum with polyurethane coating SS fasteners and shaft
• Temperature: -4Q to 175 F

Declutchable gear overrides are options which allow local manual control of actuated valves and dampers. Small double acting actuators can be provided
with either hub/wrenches or with gear overrides. The gear overrides are sized for easy operation and can be combined with other control accessories.

Applications

Accepts electrical control signal from process to pilot pneumatic actuator.

• Various voltages and area ratings
• Direct mounts to actuator manifold
• Integral manual override

Specifications

• Ratings: NEMA 4 or NEMA 7
• Materials: Anodized aluminum
• Pressure: 20 to 150 psi
• Temp.: -40 to 175 F
• Options: Various conduit styles, Dual coil, Dribble control pack for batch processing.

These heavy-duty mounting kits are designed to close tolerances to assure consistency and proper alignment, which are essential to ensure maximum actuator and valve cycle life.

Applications

Continuous or digital feedback of valve position for process control applications.

• Switch or potentiometer feedback
• Weatherproof or hazardous area designs
• High visibility indicator For manual or actuated valves

Specifications

• Ratings: NEMA 4 or NEMA 7
• Switches: Snap acting or proximity
• Materials: Aluminum with polyurethane coating SS fasteners and shaft
• Temperature: -4Q to 175 F

Declutchable gear overrides are options which allow local manual control of actuated valves and dampers. Small double acting actuators can be provided
with either hub/wrenches or with gear overrides. The gear overrides are sized for easy operation and can be combined with other control accessories.

These heavy-duty mounting kits are designed to close tolerances to assure consistency and proper alignment, which are essential to ensure maximum actuator and valve cycle life.

Applications

Accepts electrical control signal from process to pilot pneumatic actuator.

• Various voltages and area ratings
• Direct mounts to actuator manifold
• Integral manual override

Specifications

• Ratings: NEMA 4 or NEMA 7
• Materials: Anodized aluminum
• Pressure: 20 to 150 psi
• Temp.: -40 to 175 F
• Options: Various conduit styles, Dual coil, Dribble control pack for batch processing.